Proper management of an electrical system is a basic requirement considering just how a small mistake can turn out to be the cause of a disaster. Malfunctions can be caused by human errors during installation, vandalism or damages from physical elements. The only way out is periodic inspection with the aim or reveling flaws, points of weaknesses and other potential disasters well in advance for early repair. This process does not have to be time consuming and labor intensive as is normally the case when physical testing is done, instead it is prudent to resort to electrical infrared inspection that is highly effective and a significantly cheaper alternative.
The general recommendation is that all parts of electrical system that are exposed to vibrations and or any other movements are inspected at least every six months while the rest are inspected on annual basis. For the system exposed to earthquakes, frozen winter conditions, very strong winds and tsunamis, there is a need for more frequent testing.
In normal distribution, infrared surveys should be conducted on annual basis and is considered part of a regular preventive and maintenance program. This form of testing makes it possible to inspect a large number of components within the shortest time possible locating the faulty items in the system that could not be located through the physical survey or testing.
The most common system components that are subject to periodic surveys include the bus ducts, the distribution panels, distribution centers, receptacle panels, the sub-feed panels, transformers, the switchgears, the lighting system, uninterruptible power supplies, the disconnects and several other related components. With infrared surveys, the faults, loose connections and any potential hazards in these components can easily be detected with the minimal time and cost.
This is the best way in terms of cost and time to inspect almost all electrical components. The most common components that need regular inspection include transformers, switchgear, bus ducts, power correcting banks, variable frequency drives, the disconnects, distribution centers and panels, sub-feed panels, the motor control centers, the uninterruptable power supplies, the lighting and the receptacle panels among several other components.
With the endorsement and approval from the InterNational Electrical Testing Association and the National Fire Protection Association and other related regulatory authorities, it is a mistake to continue depending on the manual method of testing.
There are several benefits that comes with infrared surveys among which include the ability to pinpoint the real hot spot, the reduced down time, elimination of unplanned power outages, ability to cut down on the cost of maintaining electrical system and minimization of possible hazards and related disasters. This all translates to an efficient and reliable electrical system with reduced cost of power supply.
It is important to trust the surveying services to a company that has expert engineers, the necessary machinery for the job and well proven track record in order to enjoy the full benefits of this new technology.
The general recommendation is that all parts of electrical system that are exposed to vibrations and or any other movements are inspected at least every six months while the rest are inspected on annual basis. For the system exposed to earthquakes, frozen winter conditions, very strong winds and tsunamis, there is a need for more frequent testing.
In normal distribution, infrared surveys should be conducted on annual basis and is considered part of a regular preventive and maintenance program. This form of testing makes it possible to inspect a large number of components within the shortest time possible locating the faulty items in the system that could not be located through the physical survey or testing.
The most common system components that are subject to periodic surveys include the bus ducts, the distribution panels, distribution centers, receptacle panels, the sub-feed panels, transformers, the switchgears, the lighting system, uninterruptible power supplies, the disconnects and several other related components. With infrared surveys, the faults, loose connections and any potential hazards in these components can easily be detected with the minimal time and cost.
This is the best way in terms of cost and time to inspect almost all electrical components. The most common components that need regular inspection include transformers, switchgear, bus ducts, power correcting banks, variable frequency drives, the disconnects, distribution centers and panels, sub-feed panels, the motor control centers, the uninterruptable power supplies, the lighting and the receptacle panels among several other components.
With the endorsement and approval from the InterNational Electrical Testing Association and the National Fire Protection Association and other related regulatory authorities, it is a mistake to continue depending on the manual method of testing.
There are several benefits that comes with infrared surveys among which include the ability to pinpoint the real hot spot, the reduced down time, elimination of unplanned power outages, ability to cut down on the cost of maintaining electrical system and minimization of possible hazards and related disasters. This all translates to an efficient and reliable electrical system with reduced cost of power supply.
It is important to trust the surveying services to a company that has expert engineers, the necessary machinery for the job and well proven track record in order to enjoy the full benefits of this new technology.
About the Author:
If you need information about electrical infrared inspection, pay a visit to the web pages here today. You can see details at http://www.infraredscanningservice.com now.
No comments:
Post a Comment